You need less than the internet suggests: something to cut with, something to light with, and something to keep cigars at the right humidity. Everything past that is preference.
What do you need to start smoking cigars?
- A cutter: a sharp straight guillotine handles most cigars. Browse cigar cutters.
- A butane lighter: torch or soft flame. Browse cigar lighters.
- Humidity control: a humidor, or a sealed container with a humidity pack. Browse cigar humidors and Boveda and humidification.
- An ashtray built for cigars: see cigar ashtrays.
Cases, cedar spills and display humidors are refinements to add once you know how and where you smoke.
Cutters
A sharp straight cutter handles nearly every cigar. A V-cut gives a more concentrated draw and, per Boveda, works on most shapes and ring gauges; punches are tidy and pocketable but will not work on tapered heads. See our cutter guide.
How to cut a cigar
Find the cap line, where the rounded cap meets the wrapper, and cut just above it. Take a thin slice first; you can always cut more, but a cut below the cap line lets the wrapper unravel. Close the blades in one quick motion rather than sawing. A double-blade guillotine closes from both sides and tends to leave a cleaner edge than a single blade, and cigar scissors are useful on figurados and wide ring gauges.
| Cutter | Works well for | Keep in mind |
|---|---|---|
| Straight (guillotine) | Nearly every shape | Cut too deep and the wrapper loosens |
| V-cut | Most shapes and ring gauges, per Boveda | Opens a narrower channel than a straight cut |
| Punch | Rounded heads, pocket carry | Not for tapered heads |
| Scissors | Figurados and wide cigars | Takes a little practice |
For a cutter that doubles as a design object, see Les Fines Lames.
Which cutter fits a large ring gauge?
Check the ring gauge rating before you buy. Cigars of 60 ring or more are common now, and a cutter that is too narrow cannot take the cap off cleanly. Wide-ring cutters we carry:
- Craftsman's Bench Double Blade: J.C. Newman's double guillotine, up to 64 ring.
- Colibri S-Cut: a spring-loaded straight cut, up to 66 ring.
- Colibri V-Cut: cuts up to 7 mm into the cap; Colibri lists it at 60 ring.
- Colibri Quasar SV Cut: a straight cut to 70 ring and a V-cut to 60 in one body.
- EZ Cut 70 Gauge: stainless steel, up to 70 ring.
- Craftsman's Bench Bullet Punch: a key-chain punch for straight-sided cigars.
Lighters
Butane only — torch or soft flame. Fluid lighters leave their taste in the cigar. Torches relight quickly outdoors; soft flames are gentler on the foot. We carry Prometheus torches among others.
How to light a cigar
Hold the foot just above the flame rather than in it, and rotate the cigar until the whole end glows evenly. Then bring it to your lips and draw gently while you keep turning it. Toasting first gives an even burn line from the start. If a cigar goes out, tap off the ash, toast the foot again and blow gently through it once before relighting to clear stale smoke.
Refill with clean, refined butane, and give the lighter a few minutes to settle to room temperature before you use it. Browse cigar lighters, including Colibri and Firebird.
Which lighter should you choose?
| Lighter | Flame | Good to know |
|---|---|---|
| Palió Lazio | Angled single jet | Metal body, slim enough for a shirt pocket |
| Palió Pro Scorpius | Angled single jet | Fold-out 7.5 mm punch and a draw poker built in |
| Colibri E3 | Angled triple jet | Single-action trigger, wind resistant |
| Palió Treo | Triple jet | Extra-large tank, tested to 12,000 feet |
| Palió Veneto | Four jets | Lights up to 150 large-ring cigars per fill |
| Colibri Aura | 10 mm flat flame | Wider coverage across the foot |
A single jet is precise and easy to aim; three or four jets bring a wide foot to an even glow faster and stand up better to wind.
How do you refill a butane lighter?
Colibri's method: turn the flame adjuster to its lowest setting, hold the lighter upside down and press the valve until the hissing stops to release trapped air, then press the butane nozzle onto the valve for 4 to 5 seconds. Wait about two minutes so the lighter reaches room temperature before lighting it, and clear the burner now and then with short bursts of compressed air. Full steps are in our butane refill guide.
Humidors and humidity packs
A sealed, cedar-lined box plus a 69% humidity pack covers most collections. An airtight container with the right pack works too. Details in the humidor guide and the humidity pack guide.
Which humidity level should you choose?
Boveda puts the ideal range for cigars at 65 to 72 percent relative humidity. Below it, tobacco dries out, flavor goes flat, cigars burn fast and wrappers crack. Above it, cigars turn spongy, burn unevenly, wrappers can split and mold becomes a risk.
- 65 percent: for a drier smoke and an easier burn; Boveda also suggests it for long-term aging.
- 69 percent: Boveda’s all-round choice for humidors, sealed containers and aging. Shop the Boveda Pack 69%.
- 72 percent: for drafty humidors and dry climates, or if you like a slightly moister cigar. Shop the Boveda Pack 72%.
- 75 percent: only for very dry conditions such as deserts or high altitude; Boveda advises against it for long-term storage and in airtight containers. Shop the Boveda Pack 75%.
Boveda recommends 72 percent for dry environments, which describes most of Arizona. Its guidance is to replace packs about every three months. A new wooden humidor needs seasoning before cigars go in, and Boveda’s method uses 84 percent packs over 14 days. A digital hygrometer lets you confirm the reading instead of guessing.
Ashtrays
Cigars need a deep, wide rest — a cigarette ashtray will not hold a toro. Look for a stirrup that supports the cigar without crushing the wrapper.
Ceramic, glass and stone all work; a heavy base matters outdoors, where wind tips light trays. See cigar ashtrays.
Cases and travel humidors
For carrying two or three cigars. Several of our allocated sets arrive in collectible travel humidors, including the Opus6 and God of Fire KKP.
Match the case to the ring gauge you smoke, since a case cut for 50-ring cigars will squeeze a 60. A tube or hard case protects the wrapper in a bag, and a travel humidor with a small humidity pack keeps cigars in condition on longer trips. Browse cigar cases and travel humidors and the Opus X and God of Fire travel humidors.
Cases and ashtrays we carry
- Xikar Sentinel Leather Cigar Case: holds up to five cigars at 60 ring, with fitted pockets for a lighter and cutter.
- Rocky Patel ALR Leather Travel Case: leather with a Spanish cedar lining.
- Colibri Heritage Cube Ashtray: four rests widened for any ring gauge and a deep ash pocket.
- Craftsman's Bench Boca Grande: a tobacco-leaf tray with a rest at each end, made for indoor or outdoor use.
For a case on the road, add a Boveda 8 Gram 72%; Boveda suggests one Size 8 pack for every five cigars. More on trays in our ashtray guide.
Accessories as gifts
A well-made cutter or lighter is a gift that gets used every day. For ready-made ideas, see cigar accessory gifts, and pair them with something from glassware and barware.
Shop
Browse cigar accessories, Prometheus accessories and Opus X accessories. Call 928-276-3500 if you want a recommendation for the sizes you smoke.
$9.99 flat shipping, free on orders of $125 or more; in-stock orders ship within 1–2 business days from Yuma, Arizona.
Frequently asked questions
What humidity should a cigar humidor be?
Boveda puts the ideal range at 65 to 72 percent relative humidity, and recommends its 69 percent pack for most storage.
Do I need to season a new humidor?
Yes. A new wooden humidor should be seasoned before cigars go in. Boveda’s method uses 84 percent packs over 14 days.
How often should I replace humidity packs?
Boveda’s guidance is to replace its packs about every three months.
Should I buy a torch or a soft flame lighter?
A torch is easier outdoors and in wind; a soft flame is gentler when toasting the foot. Either works as long as it burns butane.
Where can I buy cigar accessories in Yuma, AZ?
At Sun of a Gun Cigars & Spirits, 1651 S Arizona Ave, Yuma, Arizona, an official J.C. Newman Diamond Crown Cigar Lounge. Call 928-276-3500, or order online.
Do you ship cigar accessories?
Yes. $9.99 flat shipping, free on orders of $125 or more. In-stock orders ship within 1–2 business days.
What cutter do I need for a 60 ring gauge cigar?
One rated for at least 60 ring. The Craftsman's Bench Double Blade takes up to 64, the Colibri S-Cut up to 66, and the EZ Cut and the straight blade of the Colibri Quasar SV Cut up to 70.
How long should I wait after refilling a butane lighter?
About two minutes, Colibri advises, so excess butane can evaporate and the lighter can reach room temperature.




