Sun of a Gun Cigars & Spirits
Cigar Cutters
Shop cigar cutters online from Sun of a Gun Cigars & Spirits, a Diamond Crown Lounge in Yuma, Arizona. On this page: straight, V-cut, punch and desk cutters from Colibri, double-blade and bullet punch cutters from J.C. Newman's Craftsman's Bench, the EZ Cut 70 Gauge, Colibri lighters with a cutter built in, and cutters from Les Fines Lames, Prometheus, The OpusX Society, Xikar, Palió and Vertigo. Each product page shows live stock.
Filters
69 products
About Cigar Cutters
Cigar cutters we carry
Ring gauge figures are the maker's published limits, unless noted. Prices update automatically from our inventory.
| Cutter | Cut | Ring gauge | Notes | Price |
|---|---|---|---|---|
| Craftsman's Bench Double Blade | Double guillotine | Up to 64 (J.C. Newman) | Two stainless steel blades in a plastic body (halfwheel) | $7.99 |
| Craftsman's Bench 54 Ring Double Blade | Double guillotine | Up to 54 (product name) | The size of the original Craftsman's Bench cutter (halfwheel) | $7.99 |
| XIKAR XI2 Perfect Cut | Double guillotine, closed back | 54, and up to 60 (XIKAR) | Stainless steel blades, limited lifetime warranty (XIKAR) | $35.99 |
| Colibri S-Cut | Straight, spring-loaded | Up to 66 | Blades coated with a non-stick lacquer (Colibri) | $50.99 |
| Colibri SV-Cut | V-cut and straight cut | Straight cut up to 68–70 | Both blades release from the V side (Colibri) | $90.99 |
| Colibri Quasar SV-Cut | Straight cut and V-cut | Straight 70; V-cut 60 | Keeps the cut cap in a compartment behind the blades (Colibri) | $99 |
| Colibri V-Cut | V-cut, up to 7 mm deep | 60 (Colibri's spec; its text says 60+) | Patented design (Colibri) | $50.99 |
| Colibri Diamond V-Cut | V-cut, up to 7 mm deep | 60 (Colibri's spec; its text says 60+) | Diamond pattern, matte metallic finish (Colibri) | $70.99 |
| Colibri Quasar Punch | Punch: 7, 9 and 12 mm | 60 (Colibri's spec; its text says 60+) | All-metal construction (Colibri) | $60.99 |
| Craftsman's Bench Bullet Punch | Punch, on a key chain | — | For straight-sided cigars | $7.99 |
| EZ Cut 70 Gauge | Stainless steel cutter | Up to 70 (product name) | No maker spec sheet found | $19.99 |
| Colibri Heritage Cube Desk Cutter | Desk cutter: V-cut, straight cut and three punches | 60 (Colibri's spec) | Clippings empty through a twist cap | $165 |
| Colibri Quasar Two-in-One Desk Cutter | Desk cutter: straight cut and V-cut | Straight 70; V-cut 60, 7 mm deep | All metal, 1 lb 5 oz, rubber gasket base (Colibri) | $151.99 |
Lighters with a cutter built in: the Colibri Quantum (V-cut, 60 ring), the Colibri Slide (7 mm punch) and the Colibri Boss (double guillotine). The Colibri Slim Lighter & Cutter Set pairs a lighter with a separate straight cutter for up to a 56 ring. See all cigar lighters.
Colibri cutters carry Colibri's two-year limited warranty on the mechanism, for the original purchaser in the continental United States. See the full range on Colibri & Firebird.
Every cutter on this page, by maker
All 69 products on this page, with prices that update automatically from our inventory. The Les Fines Lames cutters are distributed in the U.S. by Oliva.
How to cut a cigar
Cigar Aficionado's rule is to find the shoulder, "the place where the curved end of the cigar starts to straighten out," and cut there, about "one-sixteenth of an inch (about two millimeters) from the end." Cut too low and the wrapper starts to come apart; the magazine's advice is plain: "We do not recommend cutting below the shoulder line."
With a guillotine, Cigar Aficionado suggests you "slightly close the blades so they are just touching the cigar," then "cut it boldly using swift, even pressure." On a torpedo or pyramid, take care not to "cut off so much of the head that you actually lose the taper"; in the magazine's words, "it's better to cut too little than too much—you can always cut more." Our beginner's guide to smoking a cigar covers the rest, and our guide to lighting a cigar picks up from there. No cutter on hand? See how to cut a cigar without a cutter.
Guillotine, V-cut or punch?
| Cut | What it does | What Cigar Aficionado says | Suits |
|---|---|---|---|
| Double guillotine | Two blades close on the cap from both sides | "the cutting proceeds from both sides simultaneously"; for beginners, double-bladed cutters are "the simplest to operate" | Any shape, including torpedoes |
| V-cut (wedge) | Cuts a wedge into the cap | It "makes it easy to draw smoke through the cigar," but "the draw is sometimes too good, and the cigar will smoke too hot" | Straight-sided cigars and, per Colibri, torpedoes; not for smokers who chew their cigars |
| Punch | Bores a round hole in the cap | It "leaves much of the cap intact," but punches "work only on the flat head of a parejo" | Straight-sided (parejo) cigars |
We don't stock cigar scissors at the moment. Cigar Aficionado says special cigar scissors "can make extremely clean cuts," though "they must be wielded with some care," and warns that "a normal pair of scissors is not an acceptable substitute and can destroy your cigar."
Cutters for large ring gauges
Cigar Aficionado notes that "it is not uncommon to see cigars with ring gauges of 60 or more." For a straight cut on a big cigar, the makers rate the Colibri Quasar SV-Cut and the Quasar Two-in-One up to a 70 ring, the SV-Cut up to 68–70, the S-Cut up to 66 and the Craftsman's Bench Double Blade up to 64. By product name, the Palió Basta, the Vertigo 80 Gauge and the Vertigo VC900 Big Kahuna take up to an 80 ring. Browse big cigars on our torpedo and figurado and toro pages.
Common questions
Where do you cut a cigar? At the shoulder, where the rounded head starts to straighten out, about one-sixteenth of an inch (2 mm) from the end, per Cigar Aficionado. Don't cut below the shoulder line, or the wrapper can unravel.
What is the difference between a guillotine, a V-cut and a punch? A guillotine cuts straight across the cap, a V-cut cuts a wedge into it, and a punch bores a small round hole. Cigar Aficionado notes that a V-cut "makes it easy to draw smoke" but can smoke hot, and that a punch "leaves much of the cap intact" but works "only on the flat head of a parejo."
How do you cut a torpedo? With a guillotine, taking a little at a time. Cigar Aficionado warns against cutting so much that you "lose the taper," and says "A figurado requires the head-lopping ability of a guillotine or scissors cutter," so a punch is the wrong tool for it.
Which cigar cutter should a beginner buy? Cigar Aficionado suggests a double-bladed cutter, "as they are the simplest to operate." The Craftsman's Bench Double Blade, rated by J.C. Newman for cigars up to 64 ring gauge, is $7.99.
Which cutter handles a 60 ring gauge or larger? By the makers' ratings: the Colibri Quasar SV-Cut and Quasar Two-in-One (straight cut up to 70), the Colibri SV-Cut (68–70), the Colibri S-Cut (66) and the Craftsman's Bench Double Blade (64). Colibri rates its V-Cut, Diamond V-Cut, Quasar Punch and Heritage Cube at 60, and XIKAR rates the XI2 Perfect Cut up to 60. For an 80 ring, the Palió Basta, Vertigo 80 Gauge and Vertigo VC900 Big Kahuna are named for it.
Can I bring a cigar cutter on a plane? The TSA lists cigar cutters as allowed in carry-on bags with special instructions and in checked bags, and says: "While cigar cutters are generally permitted, we recommend that you pack them in your checked baggage." Officers have the final say. Lighters with a torch flame, including the cutter-and-lighter combinations above, are not allowed in carry-on or checked bags. Our guide to flying with cigars covers every lighter, butane and matches.
How do I keep a cigar cutter sharp and clean? Cigar Aficionado advises that "All cutters should be kept as sharp as possible" and that, on single-blade cutters, the blade compartment shouldn't fill up with bits of tobacco. Xikar, a cutter maker, suggests a paper test: "If it cuts it is sharp. If it tears, it needs buffing."
Is there a lighter with a cigar cutter built in? Yes. On this page: the Colibri Quantum with a V-cut, the Colibri Slide with a 7 mm punch and the Colibri Boss with a double guillotine. The Colibri Slim Lighter & Cutter Set pairs a lighter with a separate straight cutter.
How much is a cigar cutter? Cutters on this page run from $6.99 (Vertigo VC900 Big Kahuna) and $7.99 (Craftsman's Bench) to $399.99 (OpusX Society Sugar Cutter). Colibri cutters are $50.99 to $165, Prometheus cutters $49.99 to $124.99 and Les Fines Lames cutters $78.99 to $231.99.
Can I order a cigar cutter that is out of stock? Yes, for regular cutters. When none is on hand, the product page shows Pre-Order Now: it ships as soon as it becomes available, from a few days up to 12 months, and anything in stock in the same order ships right away. OpusX Society cutters, the OpusX and God of Fire Never Back Down Prometheus cutters and the limited My Father & Tatuaje La Union cutter show Sold Out with a Notify me sign-up instead.
How much is shipping? $9.99 flat shipping, free on orders of $125 or more. In-stock orders ship within 1–2 business days; a cutter on pre-order ships as soon as it becomes available.
Also see cigar lighters, cigar ashtrays, cigar cases and humidors.


































